Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

where do i start i got fed up with messing around with the aux heater that i bought a fully recon one but when i put it on nothing i have removed the temp sencer and put a switch in but nothing i dont even hear the little pump clicking with i turn the ignition on

has any1 come across this problem b4 or has any1 any idea how to get it going as its doing my head in this is the 2nd year i have tried to get the thing to work

Posted
have you had the fault codes read and deleted?

it has never comeup with any fault codes that has out to do with the aux heater but if you think it will help ill get them read and reset at the garage tomorrow

Posted (edited)

just a thought, give the heater a thump with a rubber mallett, after a summer of non use or sat on a shop shelf it may need waking up, i kid you not, that what i did with ours and it coughed into life.

other than that, you may need to check the wiring supply to the heater for power, earth, etc,

when i had probs a few years ago, it turned out to be the power sire to the small pump that pumps fuel to the heater, they are under the car in a messy place, near the fuel tank, the wires can get corroded and break off, thats what ours had, reconnected and heater worked. they seem linked somehow so the heater wont fire without the pump and the pump need the heater to tell it that it wants fuel.

Edited by marinabrid
Posted
will have a look got the codes reset and still nothing sound like it could be the wire your on about as i carnt here the pump kick in like iused to does any one no how to run a new wire to it if the wire hasnt broke

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...